Wellington, Florida
Blown-in insulation in Wellington
Big single-story footprints. 1990s and 2000s fill that has settled. The barn apartment over the garage is a different job than the house.
Attic insulation in Wellington
Wellington attic insulation is mostly blown-in. The squares are large, the hatches are usually in the garage, and the existing fill is often a light layer of fiberglass that no longer meets R-30, let alone R-38. Cardinal Insulation does the work from the Boca shop. Call (561) 654-7698.
Olympia, Binks Forest, Palm Beach Polo, Aero Club, Greenview Shores, and South Shore are on the run. Equestrian properties sometimes have a finished room in the roofline. That room is the spray-foam conversation. The rest of the house stays a floor blow if the attic is vented.
These attics are easier to work than El Cid, which is why they get overlooked. Settled fiberglass two or three inches down from where it was blown is normal. If it is dry, we do not remove it. We seal, then add the inches the planner shows. If rodents have nested — common where the lot backs up to a canal or a paddock — the ruined fill comes out first.
Air sealing happens before the first bag. Removal is only for wet or ruined fill. The attic planner is a range, not a bid.
How much does attic insulation cost in Wellington?
A planning range, not a bid. An 1,800 sq ft attic with 4 inches of settled fiberglass — about R-9 — needs about 11.7 inches of new blown fiberglass to reach R-38. That range is $2,100–$3,350. A bigger floor in Wellington costs more. A tight hatch, removal, and roof-deck foam are not inside that number.
Run the attic insulation cost planner with this city in mind, then text the shop a photo of the hatch. Spray foam and attic sanitizing are priced on their own.
Blown-in insulation in Wellington
Dry, thin fill gets sealed and topped to an even R-38. You get a depth check before we leave. Fiberglass is the usual top-up. Cellulose packs denser when the attic and the old fill call for it.
Spray foam insulation in Wellington
Bonus rooms and vaulted owners' suites with no attic floor are foam. A vented Wellington attic is not. We price them separately so a foam number never gets buried inside a blown-in range.
Neighborhoods we insulate in Wellington
- Olympia
- Binks Forest
- Palm Beach Polo
- Aero Club
- Greenview Shores
- South Shore
- Paddock Park
- The Isles
If your street is not named, call. We will say yes or no.
Wellington ZIP codes
33414
Most of Wellington east of the turnpike and the village core. Large production-house attics.
33449
West Wellington and the equestrian tracts. Longer driveways. Tell us about gate access when you call.
R-38 in a Wellington attic
Florida's code minimum for these attics is R-30. Cardinal's blown-in standard in Wellington is R-38. Four inches of settled fiberglass is about R-9. The planner turns your square footage and depth into inches and a range. It is not a bid.
Air sealing happens before the first bag: cans, top plates, chases, bath fans, and the hatch. A top-up over open holes does not fix the bill.
Wellington insulation questions
Who does blown-in insulation in Wellington, Florida?
Cardinal Insulation of Boca Raton. R-38 after air sealing. ZIPs 33414 and 33449. Shop at 4263 NW 1st Ave, Boca Raton. (561) 654-7698.
Do you insulate Olympia and Binks Forest?
Yes. Dry, settled fill gets topped up. We do not pull dry insulation out to resell you a removal.
Is the attic planner price a Wellington bid?
No. It is a planning range from size, depth, and material. Gates, a tight truss, removal, and foam are not in that number. The bid comes after we see the hatch or clear photos.
Blown-in insulation in nearby cities
Same crew, same R-38 standard. The only shop is 4263 NW 1st Ave, Boca Raton, FL 33431.
West Palm and the water
North county
West of the turnpike
Tell us the attic. We'll say if it's a top-up.
Call, or send the planner. A photo of the hatch helps.